Publicidad
Idiomas disponibles
Idiomas disponibles
Refreshing textile materials
Before treatment with the steam cleaner,
check fabric tolerance in a hidden area:
First apply a large amount of steam, then
let it dry and then check for any change in
color or shape.
Cleaning surfaces with a protective
coating or varnished finish
When cleaning lacquered or synthetic-
coated surfaces, such as kitchen or living
room furniture, doors or laminates, wax,
furniture polish, plastic coatings or color
may come off or the surface might get
stained. To wash these surfaces, apply
steam with a cloth on the surface.
CAUTION
Do not project the steam jet at glued
edges, as the glue could dissolve under
the effect of steam. Do not use the steam
cleaner on wood or laminate floors that are
not sealed.
Cleaning windows and glass
surfaces
Preheat windows in case of low outside
temperatures, especially in winter. To do
so, apply some steam all over the glass
surface. This will prevent surface tension
that can cause glass to crack.
The window surface can then be cleaned
with the hand nozzle and liner. To remove
water, use a glass wiper or dry the surfaces
with a cloth.
CAUTION
Do not apply the steam jet at sealed
areas of the window frame so as not to
damage them.
Steam application gun
The steam application gun can also be
used without accessories. For example:
– To remove slight wrinkles from hanging
clothes, apply steam from 10-20 cm away.
– To remove dust from plants, stay 20-40
cm away.
– For wet dusting, apply some steam on a
cloth and wipe furniture with it.
Concentrated jet nozzle
Figure
4
Assemble the concentrated jet nozzle on
the steam gun.
The closer it is to the dirty area, the more
effective cleaning will be, because the
temperature and steam are highest at the
nozzle outlet. Very practical for
cleaning hard-to-reach areas, seams,
fittings,
drains,
and radiators.
Round brush (small)
The round brush can be mounted as an
extension of the spot-jet nozzle. The
toughest dirt can be easily removed
by brushing.
CAUTION
Not suitable for cleaning delicate surfaces.
Figure
C
Secure the round brush to the spot-jet
nozzle.
High-performance nozzle
The high-performance nozzle is used to
clean stubborn dirt and to clean corners or
crevices by blowing, etc.
Figure
C
1. Mount the high-performance nozzles
corresponding to the round brushes on
the jet nozzle.
ATTENTION
Using the turbo steam brush for an
extended period of time can lead to
vibration-related
in the hands. Take a break if you notice
symptoms such as tingling hands or cold
fingers. A general valid rule for usage time
sinks,
toilets,
blinds
circulatory
disorders
29
Publicidad
