Kärcher SC 4 Manual Del Usuario página 30

cannot be determined because it depends
on many factors:
– Personal predisposition to severe
circulatory disorders
fingers, tingling hands).
– Circulatory disorder limited by firm grip.
– Continuous operation is more harmful
than interrupted use with breaks.
With prolonged regular use of the turbo
steam brush and repeated occurrence
of symptoms (e.g. tingling hands, cold
fingers), you should see your doctor.
Nozzle for textile materials
Application Uses
– To renew garments and fabric (such as
curtains, jackets, blazers, etc.)
– To iron garments and fabric
– To eliminate bad smells
– To remove lint and fur
When pressing the steam lever, first direct
the steam applicator gun toward a cloth
until steam comes out evenly.
Manual cleaning nozzle
Figure
B
Mount the hand nozzle on the steam gun.
Cover the hand nozzle with the sleeve.
Ideal for small washable surfaces, shower
enclosures and mirrors.
Floor nozzle
The floor nozzle is used for cleaning
washable floor or wall facings, such as
stone, tile or PVC.
CAUTION
Damage from steam application
Heat and moisture can cause damage.
Before application, test the heat resistance
and steam consequences discretely on a
discrete area with a small steam volume.
Note
Detergent residues or emulsions on
surfaces to be cleaned can cause marks
during steam cleaning that disappear after
repeated applications.
30
(frequently cold
We recommend scrubbing or vacuuming
the floor before using the equipment. This
will remove loose particles and dirt before
wet cleaning. Work slowly on heavily
soiled surfaces so the steam can work
for longer.
Figure
D
1. Connect the extension tubes to the
steam gun.
Figure
F
2. Fit the floor
extension tube.
Figure
G
3. Attach the floor cloth to the floor nozzle.
a) Place the floor cloth on the floor with the
adhesive strips facing upward.
b) Place the floor nozzle on the floor cloth
by pressing slightly.
The floor cloth sticks to the floor nozzle by
means adhesive.
Remove the floor cloth
Figure
G
1. Place one foot on the flap of the floor
cloth and lift the floor nozzle.
Note
Initially, the adhesive strips on the floor
cloth grip tightly and it may be hard
to remove from the floor nozzle. After
continuous use and after washing the
floor cloth, it can be easily removed from
the floor nozzle and will have reached the
ideal adhesion.
Floor nozzle holder
Figure
I
1. When pausing work, hang the floor
nozzle on the support.
Carpet glider
Using the carpet glider refreshes carpets.
CAUTION
Deterioration of the carpet glider and
the carpet
nozzle onto the