DynaTrap DT1100-DEC Manual Del Propietário

MODEL: DTl 100-DEC
OWNER'S MANUAL
Thank you for purchasing this
DYNATRAP® Insect Trap!
c:3
This product moy be covered by one or more U.S. patents
or pending potent applications. See www.dynotrop.com/potents
)i)i)i)i
ALL-WEATHER CONSTRUCTION
INDOOR/OUTDOOR • RAIN OR SHINE
IMPORTANT SAFETY INSTRUCTIONS
WARNING, When using electric appliances, basic precautions should always be followed, including the following:
- To disconnect, turn all controls to the off ("0") position, then remove plug from outlet.
- Unplug from outlet when not in use and before servicing or cleaning.
- To reduce the risk of electrical shock, do not put appliance in water or other liquid.
- This appliance is provided with double insulation. Use only identical replacement parts.
See instructions for Servicing of Double-Insulated Appliances.
INSTRUCTIONS FOR DOUBLE-INSULATED, CORD-CONNECTED APPLIANCES:
In a double-insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided
on a double-insulated appliance, nor should a means for grounding be added to the appliance. Servicing of a double-insulated
appliance requires extreme care and knowledge of the system, and should be done only by qualified service personnel.
Replacement parts for a double-insulated appliance must be identical to those parts in the appliance.
IMPORTANT SAFETY INSTRUCTIONS
Please read these instructions before using the DynaTrap®lnsect Trap and keep for future reference.
1. Always turn unit off and disconnect plug before servicing, cleaning, or changing bulb.
2. Do not position the unit near heat, gas, oil or other flammable materials.
3. Mount product out of reach from children.
4. Never operate this product ii it has a damaged cord or plug, ii it is not working properly, ii it has been dropped or
damaged, or ii it has been dropped into water.
5. This product is equipped with 2-conductor cord and 2-prong polarized plug as a safety feature. This plug will lit in
a
polarized oudet only one way. If the plug does not fully lit in the outlet, then reverse the plug. If it still does not lit,
then contact
a
qualified electrician. To reduce the risk of electrical shock, only plug into a properly installed outlet.
Do not attempt to defeat this safety feature.
6. Do not insert lingers or any foreign objects into the unit while it is connected to an electrical outlet.
7. Collected insects within the unit may contribute to lire, so clean insects from the unit frequently.
8. Do not clean this product with water spray. Do not place where it can fall into water, or near flammable materials.
9. Do not touch Ian while in motion.
10. Do not abuse cord-never carry or hong unit by cord or yank ii to disconnect from receptacle. Keep cord away from heat,
oil, or sharp edges.
11. Use only extension cords that ore clearly marked "Suitable for Use with Outdoor Appliances" ond that have plug and
receptacles that match the product plug. Replace oll damaged cords.
INSTALLATION & OPERATING INSTRUCTIONS
1. Unpack unit. Save carton for off-season storage (if needed).
2. If hanging or mounting the unit, place approximately 3-6 feet above the floor/ground level for optimal catch rate and
easy access for cleaning.
3. If mounting the unit to a wall, install the mounting bracket to the side of the DTl 100. This bracket slides into side wall
of the DTll 00.
4. Turn power switch to "ON" position (The power switch is located under the rain protector)
5. Plug cord into an outdoor outlet or UL listed extension cord as described in "IMPORTANT SAFEIY INSTRUCTIONS".
6. For best catch results leave unit on at all times, except when cleaning or servicing.
7. It is recommended to place the unit 20-40 feet away from where people will be sitting.
8. Catch rate activity will be higher at night. For best catch results it is recommended to keep the unit away from competing
light sources. Intended for household use only.
CLEANING
Clean the trap at least once a week to prolong life of the unit, insure lire prevention, and provide for more efficient operation.
1. Be sure to clean the unit once per week
2. Switch the unit off and unplug before cleaning
3. For weekly cleaning, twist the cage clockwise. Remove the damper by grasping the crossbar near the edge of the damper.
Pull up firmly. Remove ony buildup from the inside of the retaining coge and Ian with o brush (included). Replace damper,
snap firmly into place.
4. For mojor cleaning, remove the screws securing the Ian housing to the light housing. After removing the screws,
gently pull the Ian housing away from the light housing. Using a salt brush, remove dirt and debris from the light housing.
Once the cleaning process has been completed, align the screw holes in the Ian housing with the screw holes in the
lighting unit and tighten the screws to the base of the lighting unit.
IMPORTANT: When replacing the retaining cage - DO NOT press/ push against the screen windows.
REPLACING BULB
The Light bulb life expectancy is approximately 3,000 hours (or about 4 months), and should be replaced regularly to ensure
optimal UV effectiveness. Even though the bulb's light may be visible to you, its ability to attract insects diminishes over time.
1. Turn power switch to "off" position. UNPLUG UNIT, and allow bulb to cool before replacing.
2. Remove the screw securing the cover (A) and then twist cover counter-clockwise (B). Th
cover
lxick
to expose
bull.
Note: Upper
cnl kiwer
sections
wil remain mooec1ed by eledriml
wre -
Do Not Pull or Attempt To Disconnect.
3. (C) Cover the bulb with a cloth to protect your linger and hand. Grasp the bulb (with your hand and lingers protected by the
cloth) and gendy pull the bulb from the socket.
4. Remove any debris from the lamp socket with a brush before inserting the new bulb.
5. Replace cover onto grill and twist clockwise to lock, replace screw (A) and tighten to secure.
6. Replacement fluorescent bulbs can be found at your local retailer or can be ordered directly from Dyna Trap by calling
1-877-403-TRAP (8727) or visiting www.dynatrap.com.
HOW THE DYNATRAP® INSEO TRAP WORKS
Flying insects are attracted to the unit by the UV light and CO2
that is generated by the photo-catalysis between the UV
lamps and the special TI02 coating. The Ian then pulls the
insects into the screened base, trapping them until they
dehydrate and die. The base can be removed, allowing the
contents to be periodically emptied into the trash. The
see-through screen shows the insects trapped in the
compartment, alerting you when the cage needs to be
emptied.
UV
BULB
.. .;;;;;;~ ~ ~!11::b ~ ;;::;.--
TI02
----,,,,:1+-F= COATED
RETAINING
CAGE
"t-1"-t----
SURFACE
WALL
MOUNT
AUTOMATIC
DAMPER
TROUBLESHOOTING
Problem: Possible cause: Correction:
Bulbs do not illuminate 1. No electrical power 1. Check plug and receptacle and fuse or circuit breaker.
and Ian does not spin. 2. Check to make sure power is switched to the "ON"
position.
Bulb illuminates, but fon 1. Shorted Ian 1. UNPLUG UNIT: Examine Ian to see that ii is free from
does not spin.
foreign material, dirt or build-up of dead insects. Clean unit as
in "CLEANING" section.
Fan spins, but bulb does 1. Bulb not seated 1. Check all sockets for proper bulb sealing and alignment.
not illuminate properly 2. Replace bulb ii needed following instructions under
2. Burnt out bulb "Replacing Bulbs".
LIMITED WARRANTY
DYNAMIC warranties to the original purchaser that this product is free from defective materials and
workmanship. This warranty is limited to remedy any defective part for a period of one year from date of
original date of purchase. Retain your original receipt as proof of purchase. This warranty does not apply
to the light bulb, nor to, in our judgment, misuse or abuse. If
this unit has been altered, no warranty is in
force. This warranty does not apply if this unit is purchased outside the United States, Canada and Mexico.
In no case shall DYNAMIC be liable for any accidental, punitive, consequential, or any other damages of
any kind for breach of this or any other warranty, expressed or implied, whatsoever. Some states do
not allow limitation on how long an implied warranty lasts, so the above limitation or exclusion may not
apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary
from state to state.
PARTS & ACCESSORIES AVAILABLE
PART DESCRIPTION
410SO
7-Watt Replacement Fluorescent Bulb
(1
piece)
To see all replacement and accessory parts available for your Dyna Trap,
including UV-bulbs, fans, retaining cages, and more, visit www.dynatrap.com.
l ~ \\IC.
Dynamic Solutions Worldwide, LLC
12247 W. Fairview Ave. Milwaukee, WI 53226
Phone: 414-431-2819
Toll free: 1-877-403-TRAP (8727)
Toll free lax: 877-403-3293
Email: dynotrapinfo@dsw-llc.com
Visit us online at www.dynatrap.com
©
Dynamic Solutions Worldwide,
LLC
m
24/7
' I /
a
-0.-
/1'
~~~~~~~~
SAVE THESE INSTRUCTIONS
c@~
lntertek
,,