Domo DO1103SV Manual De Instrucciones página 39

The stick vacuum cleaner
1. Attach the dust container to the motor unit. To do this, first place the bottom of the reservoir into
the motor unit. Then click the top of the dust container onto the motor unit.
2. Click the vacuum wand into the suction opening at the front of the appliance.
3. Click the motorised floor brush, the dust brush or the crevice tool into the vacuum wand.
To disassemble the appliance, remove the following parts one by one:
The floor brush (or the crevice tool or dusting brush), the wand and the dust container. To do this, press
the release button and remove the relevant part by pulling firmly.
CHARGING
· Prior to first use, charge the machine for 24 hours in order to be able to utilize the full capacity of the
battery. The appliance should be charged for 4-5 hours afterwards.
· First, connect the adapter to the appliance and then plug the adapter into a power socket.
· To extend the life of the battery, the appliance should be fully charged regularly and the battery
should be allowed to drain.
· The appliance will warm up slightly when charging; this is normal.
· The light on the handle will flash while the appliance is charging. Once the appliance is fully charged,
the lights will turn off.
· The appliance cannot be used while charging.
www.domo-elektro.be
2
1
39
DO1103SV