Tripp-Lite SmartRack Serie Manual Del Propietário página 9

6. Wall Mounting the Enclosure
2. Use a Drill and Punch (Such as
a Greenlee) to Create a Bottom
Conduit Cutout
Note: This conduit cover supports a maximum Conduit
Trade Size 2 with 2.5" hole.
3. Run Data and Power Cable (If
Required) Through the Conduit
Cutout
Note: To maintain a NEMA rating, use sealed fittings
in the cutouts when connecting to conduit. Accessory
gland plates with model numbers SRGP1KO, SRGP2KO,
SRGP3RM and SRGP4PLASTIC are available (sold
separately).
9