Publicidad
HOLEX Automatic cable reel
de
Fault
en
cs
da
es
fi
fr
9.
Cleaning
Disconnect from the power supply before starting cleaning. Wipe down the casing with a slightly damp cloth.
Do not use chemical, alcoholic, abrasive or solvent-based cleaning agents.
hr
10. Transport and storage
Store in the original packaging or box, protected from light, free of dust in a dry place.
hu
11. Technical data
Designation
Nominal voltage
it
Rated power
lt
Temperature range
Index of protection
nl
Usable cable length
Cable class
Number×cross-section of core wires
pl
Weight
Width × depth × height
pt
Bracket swing range
12. Recycling and disposal
ro
ru
sl
sv
12
Possible cause
Connected consumer
overloading cable reel.
Heat-sensitive overload
protection has cut power.
Overload protection dam-
aged
Do not dispose of with domestic waste. Comply with the national regulations for disposal. Users
have an obligation to take devices to a collection point.
Device can be submitted free-of-charge to Hoffmann Group for disposal. Contact Hoffmann
Group customer service.
Action
1. Unplug cable reel from
mains and unplug all con-
sumers.
▶ Cable must be reeled
off to full length.
2. Allow the cable reel to
cool down for five
minutes, then press the
reset knob on the cable
reel.
3. Plug cable reel into
mains, connect con-
sumers to cable drum.
▶ Do not exceed the max-
imum voltage and power
of the cable reel.
Replace overload protec-
tion.
Article no. 081193 15
230 V
fully reeled in: 1000 W
fully unreeled: 2000 W
- 20 °C + 50 °C
IP 20
15 m
H07RN-F
2
3G×1.5 mm
7 kg
430 mm × 175 mm × 350 mm
180°
Performed by
Trained specialist for electro-
technical work
Hoffmann Group Customer
Service
Publicidad
