identités RS1 Manual De Instrucciones página 13

6.Once near the required seat, the user should have their back to the seat and be able to feel the edge of the seat near the
back of their legs.
7.The carer should steady the device as previously described. The user can then use the handle Tubing as a support whilst
lowering into the new seat.Once near the required seat,
CARE AND MAINTENANCE
Failure to care for and maintain your product may result in the risk of serious injury.
• Clean the product regularly with lukewarm water and a soft cloth. Do not use abrasive products, detergents or solvent-based
products.
• Dry with a clean, dry soft cloth.
• The prduct can be cleaned in an aqueous decontaminant machine at 60°C.
• Alternatively, the device can be chemically decontaminated in an autoclave machine at 60ºC.
• Periodically check the following:
1.Castors are securely fitted, the wheels run smoothly, and there is no sign of corrosion, damage or debris in the
mechanisms.
2.Check the Patient Turner revolves smoothly and easily. Ensure there is not excessive wear or play in the nylon discs
and Base Plate.
3.Check the Lower Leg Support bracket adjusts smoothly and securely, and look for signs of wear to the two
polyurethane pads.
4.Ensure the handle and all fasteners are secure.
• In case of malfunction, do not repair the product yourself. Consult an authorised dealer.
CHANGE OF OWNERSHIP
The product can be reused. It must first be cleaned and disinfected in accordance with hygiene instructions. When transferring
your product, remember to hand over all the necessary technical documents to the new user. Beforehand, the product must
be inspected by an authorised specialist.
RECYCLING
When the product has become unusable and you have to throw it away: please contact your specialist dealer. If you wish to
carry out recycling for yourself, ask your local waste management company for disposal guidelines.
STORAGE
Failure to observe the storage conditions can lead to deterioration of the product and thus to the risk of serious
injury.
Do not store your product for an extended period of time near a heat source or in the sun (e.g. behind a window or near a
radiator) or near a cold source.
Keep away from all flames and sources of sparks.
Respect the conditions for storing and storing your product.
•
In a dry and temperate place
•
Protect your product by packaging it from dust, corrosion (e.g. abrasive elements, sand, sea water, salty air).
•
Store all removed parts together in the same place (or locate them if necessary) to avoid mixing them with other
products when reassembling.
•
All components must be stored without any load (do not place any objects that are too heavy on the product elements,
do not jam anything...).
PERIOD OF USE
The life expectancy of this product is 5 years under normal use, safety and maintenance conditions for a user. Beyond this
period, the product can be used for as long as it is still in good condition.
Version Juin 2023 13