Publicidad
Idiomas disponibles
Idiomas disponibles
To adjust the adjustable handle
1. Loosen the clamp lever.
2. Move the adjustable handle to an applicable
position.
3. Tighten the clamp lever.
To select the correct blade dimension
and installation position
WARNING:
Kevlar. The blades are very sharp.
All available blade types can be used for their approved
materials: hardwood, ceramics, linoleum, vinyl, carpet,
adhesives and glue. Refer to
It is necessary to select correct dimension and
installation of the blade for the material to remove and
the subfloor type. Blades of different dimension can be
necessary during the same work operation.
•
Select a blade of smaller dimension in these
situations:
a) At the start of an operation.
b) Operation on materials with strong adhesive.
c) Operation on hard materials.
•
Select a blade of wider dimension in these
situations:
a) Operation on soft materials.
•
Select a thicker heavy duty blade for hard materials.
A thicker blade also has a longer life.
1804 - 003 - 28.08.2023
Use protective gloves with
Blades on page 30 .
•
Install the blade with the bevel up for removal of
materials from concrete floors.
•
Install the blade with the bevel down for removal of
materials from wood floors and soft subfloors.
To remove and install the weights BS
110
To disassemble and assemble the product BS
Refer to
75 on page 24 for information on how to remove and
install the weight on BS 75.
WARNING:
1. Disconnect the power supply.
2. Remove the 2 nuts (A).
B
The weights are heavy.
A
C
11
Publicidad
