Husqvarna BS 75 Manual Del Usuario página 24

To attach the product to a
transportation vehicle
1. Make sure that the drive wheels are engaged. Refer
To engage and disengage the drive wheels on
to
page 12 .
2. Put the product in storage position. Refer to
the product in storage position on page 25 .
3. Attach tie-down straps to the lifting point.
4. Attach and tighten the tie-down straps to the
transportation vehicle.
5. Make sure that the product cannot move.
To disassemble and assemble the
product BS 75
1. Disconnect the power supply.
2. Remove the blade, refer to
page 19
WARNING:
with Kevlar. The blades are very sharp.
24
To put
To replace the blade on
Use protective gloves
3. Remove the unit with the connection for the dust
extractor hose.
4. Loosen the 2 knobs (A).
A
5. Turn the 2 levers forward (B).
6. Move the weight (C) forward.
C
7. Lift the handle unit (D).
B
D
1804 - 003 - 28.08.2023