Control Panel (Leds And Buttons) - Epson TM-J7000 Manual Del Usuario

Control Panel (LEDs and Buttons)

See illustration B.
LEDs
POWER
Lights when the power is on and is off when the power is off; flashes during
cleaning and other operations such as power-on and power-off.
Note:
Never open the printer cover or turn off the printer when the POWER LED is flashing.
ERROR
Lights when the printer is offline (when the ink cartridge is removed because
time to replace the ink
open.) Off when the printer is online. Flashes when an error occurs. (See the
Troubleshooting section.)
INK
Lights when the ink cartridge is not installed or
cartridge. Off when the ink cartridge is installed and ink is adequate. Flashes
when the ink is low. The TM-J7100 and TM-J7600 have two INK LEDs, one for the
color cartridge and one for the black cartridge.
Note:
To insure print quality, some ink remains in the cartridge after the INK LED comes on.
CUT SHEET
Lights when cut sheet (slip, check) is selected as print sheet. Off when roll paper is
selected as print sheet. Flashes when the printer is in the cut sheet insertion or
removal waiting state.
PAPER OUT
Lights when roll paper is out or nearly out.
Buttons
PAPER FEED
PAPER FEED feeds the roll paper or the cut sheet.
Note:
Paper cannot be fed using this button in the following cases:
• The printer cover is open.
• Printer is in the cut sheet insertion or removal state.
• When head cleaning is being performed or an error has occurred with any sheet selected.
• When check is selected as print sheet.
CLEANING
If printing becomes faint or uneven and the INK LED is not on or flashing, use this
button to clean the print head. Press the button more than 3 seconds. When the
cleaning stops, the printer is ready for normal printing.
Note:
Do not use the CLEANING button unless there is a problem with print quality.
Unnecessary cleaning will waste ink.
cartridge, the roll paper is at the end, or the printer cover is
TM-J7000/J7100 – TM-J7500/J7600 User's Manual 5
it is time to replace the ink
English
it is