Publicidad
Idiomas disponibles
Idiomas disponibles
Using theControls- Electronic Control Models
Fabric Selection
Select the appropriate
fabric cycle for the type of load
by turning the cycle selector dial until the indicator
light by the desired fabric selection
is illuminated.
Quick Wash
For lightly soiled or wrinkled
Gentle/Fast
garments
needed quickly.
Ultra Handwash
Ex. Gentle/Slow
Handwash
Gentle/Slow
No Iron
Medium/Slow
Regular
Medium/Fast
Whites & Towels
Normal/Fast
Provides intermittent
agitation and
soak. For wool, silk, and other
hand-wash-only
fabrics.
For sheer fabrics, bras and lingerie
needing slower spin speed because
of clothing construction.
For "wash and wear" and synthetic
fabrics and lightly to normally soiled
garments
needing a slower spin
speed to reduce wrinkling.
For most sturdy fabrics including
cottons, linens and normally soiled
garments
needing maximum water
extraction.
For sturdy fabrics and heavily soiled
whites needing maximum water
extraction.
Soak Only
Provides approximately
33 minutes of alternating
periods of soaking with brief agitation at slow speed.
At the end of the cycle, the Cycle Selector dial must be
manually set to a wash cycle or spin cycle to drain the
washer. Avoid extended soaking.
Spin Only
Provides a spin to remove more water from the load.
Rinse and Spin
Use for loads that need rinsing only or to add rinse-
added fabric softener to a load.
Power
Off
To cancel the cycle and turn off the washer, turn the
Cycle Selector dial to Power Off and push the dial in.
Start the Washer
To start the washer, press the cycle selector
dial.
Changing
a Cycle
If an incorrect
cycle has been accidentally
selected:
1. Press the cycle selector
dial.
2. Turn the cycle selector
dial to the desired cycle.
3. Set the desired options for the cycle.
/4. Press the cycle
selector
dial. The Wash indicator
lights stop flashing and the new cycle starts.
Canceling a Cycle
To cancel a cycle:
1. Press the cycle selector
dial.
2. Turn the cycle selector dial to Power Off and push
the dial in.
To drain the washer:
1. Select the Rinse & Spin or Spin Only cycle.
2. Press the cycle
selector
dial. The Spin light
illuminates
and the washer starts the rinse or spin.
11
Publicidad
