Publicidad
Idiomas disponibles
Idiomas disponibles
Control features vary by model.
Select Cycle
To select a cycle, push the control dial in (off position)
and turn it to the right (clockwise)
until the pointer is at
the soil level needed for the wash load in the Regular,
Handwash
or No Iron Fabrics cycles.
Regular Cycle
Provides normal agitation and normal spin speeds to
wash cottons and heavily soiled items. For maximum
cleaning, set the dial at Extra Heavy.
No Iron Fabrics Cycle
Provides normal agitation and normal spin speeds with
a spray rinse to reduce wrinkling.
Handwash Cycle
Provides intermittent
agitation and soak for delicates
and knits.
Pull Control Dial Out to Start
You may stop the washer at any time by simply
pushing the control dial in. Therefore
it is possible to
obtain a non-agitated
soak or to shorten, skip or
repeat any part of a cycle. The control dial must be
pushed in (off position) when you change the setting.
I Note."
Do not attempt to turn the control dial
counterclockwise.
Damage to the timer will result.
Publicidad
