Technics SA-GX505 Manual Del Usuario página 25

nt of each channel. balance
Press the test signal button.
Test signal sounds sequentially as follows:
Front speaker (left) Center speaker
1
Rear speakers (left, right) Front speaker (right)
1 'Switch ON the power.
Select the "A" and/or "B" speaker system(s)
to be used.
Turn on the Dolby Pro-Logic Surround mode.
Adjust the volume balance.
The Dolby Pro-Logic Surround indicator will illuminate when
While standing in the listening area, adjust the output level
this mode is selected.
of each speaker until they are all identical.
V: Decrease the output level.
Dolby Pro-Logic Surround indicator
A: Increase the output level.
FEO TONE MOoe
*MANUAL
Hue
10 # Q
(Hz} 40
63 100 160 250 400 630 1k 16k
25k 4k 63k 10k 125k 16k
DD [pesay sumeouwe)]
/ Stop
the test signal.
Select one of the center modes.
Each time the button is pressed, the center mode indicators
will change as follows: NORMAL—~PHANTOM—>CENTER
OFF...
Center mode indicators
+9 42 cr ie eer
= = "MANUAL
a
Ol sein
=
= CELE
be
~O ce)
{Hz} 40 63 100 160 250 400
630 1k 16k 25k 4k 63k
10k 125k 16k OC GGetevsunnouno]
INORMAL PHANTOM
QUARTZ Lock tm tl { mt
CH 4 a ne Li Ld ' { Li MHz . MIN wes wt soy oone MAX
NORMAL... eed Select this mode when using the center
speaker and the rear speakers.
PHANTON .........0004 Select this mode when not using the
center speaker (In this case, the center
speaker channel is played through the
left and right speakers).
CENTER OFF........ Select this mode when adjusting the [N-
PUT BALANCE. (Refer to page 28.)
ey