Technics SA-GX505 Manual Del Usuario página 29

4.3
VCR (VCR 1) recording
Before recording, prepare the VCR (VCR 1) for recording (recor-
ding level adjustment, etc.).
Be sure to set the input selector on the VCR to the external input
position.
1 Switch ON the power.
Select the "A" and/or "B" speaker system(s)
to be used.
Check to be sure the tape indicator is not
illuminated.
If the tape indicator is illuminated, press this switch.
Select the video source for recording.
Then, select the audio source if it is different from the video
source as in simulcast broadcasting.
Begin recording.
Follow your VCR's operating instructions.
Begin the audio/video source to be record-
ed.
Adjust the volume level and the tone quality
as desired.
(Refer to page 14.)
—31—
Edit recording from VCR 2 to VCR 1
Before recording, prepare the VCR (VCR 1) for recording (recor-
ding level adjustment, etc.).
| Switch ON the power.
Select the "A" and/or "B" speaker system(s)
to be used.
Check to be sure the tape indicator is not
illuminated.
lf the tape indicator is illuminated, press this switch.
Press the "VCR 2" button.
7 he "[2]" will be displayed on the VCR display.)
4
Begin recording on the VCR 1 and playback
the tape on the playback VCR 2.
Follow your VCR's operating instructions.
Adjust the volume level and the tone quality
as desired.
(Refer to page 14.)
©