KRESS KAB25 Manual página 5

OPERATION INSTRUCTIONS
Recommendations for optimal handling of the battery
NOTE:
1. Your battery pack is UNCHARGED. To ensure full capacity of the battery,
completely charge the battery in the battery charger before using your
power tool for the first time.
2. A battery pack will slowly lose its charge when kept out of the charger or
left in an unplugged charger for a long time. It may need to be recharged
before use.
The Li-Ion battery is protected against deep discharging. When the battery
is empty, the machine is switched off by means of a protective circuit: The
tool no longer rotates. In a warm environment or after heavy use, the battery
pack may become too hot to permit charging. Allow time for the battery to
cool down before recharging. The Li-Ion battery can be charged at any time
without reducing its service life. Interrupting the charging procedure does
not damage the battery.
How to charge the battery
Refer to the instruction manual provided with product or charger.
WARNING: Do not continue to press the On/Off Switch after
the machine has been automatically switched off. The
battery could be over-discharged.
Store the battery only within a temperature range between 0 C and 45 C. As
o o
EN
5