Publicidad
Idiomas disponibles
Idiomas disponibles
7 Reinstall the filters, grasp the filter handles and place the back
edge of the filter into the hood.
1
A. Front handle
B. Rear handle
8 Push up and back on the rear handle and place the back of the
filter into the drip pan to secure it. Repeat for each filter.
3
2
A. Front handle
B. Rear handle
Metal Filters and Drip Trays:
1 Use 2 hands to remove filters.
2 Grasp filter handles, pull toward the front of range hood and
pull down on the rear handle to remove. Repeat for each filter.
A
A. Grease filter
3 Remove grease drip tray.
A
A. Drip tray
4 Wash metal filters and grease trays as needed in dishwasher
or hot detergent solution to clean.
5 Replace grease drip tray.
6 Reinstall filters, grasp filter handles and place front edge of
filter into the hood.
7 Push up on the back handle and set rear of filter into the drip
tray to secure. Repeat for each filter.
A
A. Grease filter
10
A
B
4
A
A
B
B
Replacing a LED Lamp
Turn off the range hood and allow the LED lamp to cool.
To avoid damage or decreasing the life of the new lamp, do
not touch lamp with bare fingers. Replace lamp, using tissue or
wearing cotton gloves to handle lamp.
If new lamps do not operate, make sure the lamps are inserted
correctly before calling service.
1 Disconnect power.
2 Push up on the lens and turn it counterclockwise.
3 Remove the lamp and replace it with a 120-volt, 7.5 W watt
maximum halogen lamp with a GU10 base. Turn it clockwise to
lock it into place.
4 Repeat steps 2-3 for the other lamps if needed.
5 Reconnect power.
Publicidad
