Introduction; Description Of The Machine; Symbols Used - Bell Logic Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 62
TRANSLATION OF ORIGINAL INSTRUCTIONS

INTRODUCTION

Congratulations on your choice of a BELL® log splitter!
Please read this manual carefully. Following all the instructions provided will ensure that you get excellent results and the best performance from
your log splitter.
BELL® log splitters have been designed and manufactured in compliance with the most recent European safety regulations with particular
reference to the EN 609-1 and CEI EN 60204-1 standards.
The two-hands control systems, in fact, have been designed and engineered so that the operator is forced to work in the safety area, employing
both the hands, without any possibility of inserting hands or arms in dangerous areas.
This log splitter machine is produced in conformity with the specifications contained in the RoHs directive 2002/95/CE
Before transporting, installing or operating the machine, read all parts of this manual, paying particular attention to the specific
safety regulations.
Operators who are unable to understand any of the languages in which this manual is written are responsible for asking the retailer to provide a
manual in their own language.
The operator must also train any other person authorised to use the machine.
Failure to comply in any way with these instructions, improper use of the machine, extraordinary maintenance operations not
carried out by skilled, authorised personnel, removal of data plates or markings of any type, removal or tampering with the guards
and safety mechanisms of the machine or any other action not expressly authorised that may impair the active and passive safety
systems of the machine shall relieve the manufacturer of all and any liability and may result in serious injury and damage.
If the machine is tampered with in any way by unauthorised personnel, the guarantee is automatically null and void. This manual is an integral part
of the machine and must accompany it even in the case of transfer of ownership.
WARNING:
The ignition system of your machine produces an electromagnetic field of very low intensity. This field could
interfere with certain pacemakers. To reduce the risk of serious or fatal injury, persons with pacemakers should consult their
doctor or the manufacturer of the pacemaker before using this machine

1 - DESCRIPTION OF THE MACHINE

LOGIC is a portable horizontal log splitter equipped with electric motor.
The various parts of the machine are shown in fig.1, page 2.
1 - Wedge
2 - Oil tank
3 - Wheels for minor movements
4 - Electric motor
5 - Electric motor starter push-button

1.1 - Symbols used

Standard graphic symbols are used on all machines in order to ensure complete safety of all parts of the log splitter. As these symbols are very
important, read the information below attentively.
It's necessary to read carefully the entire use and
maintenance manual of the machine, before using it
it is obligatory to wear safety footwear at all times to
provide protection against the risk of logs accidentally
falling on feet.
it is obligatory at all times to wear gloves which protect
the hands against chips and splinters which may be
produced during work.
it is obligatory at all times to wear goggles which protects
the eyes against chips and splinters which may be
produced during work.
The log splitter must be used by one person alone.
it is forbidden to stand in the range of action of the machine.
apart from the operator, no other person or animal may be
present within a radius of 5 metres from the machine.
Dumping of used oil in the environment is forbidden. The
oil must be disposed of according to current legislation in
the country where this operation is carried out.
Danger of cutting or crushing of the hand: never touch
hazardous areas while the wedge is moving.
14
6 - Foot
7 - ZHB hydraulic control lever
8 - Log pusher and lifting handle
9 - Log retention brackets
Warning: always pay attention to the movement of the log
pusher.
Warning: never remove a log trapped in the wedge with
your hands.
Warning: Before carrying out any maintenance operation
described in this manual, disconnect the plug of the machine.
Warning: voltage as indicated on the rating plate
Machines fitted with electrical parts must not be disposed of
as general waste and must be separated for disposal as
separately collected fractions, deposited at authorised
collection points.
Regulating speed with the control lever: in the first position,
about halfway down, the log splitter is faster but less
powerful; with the lever pressed all the way, the machine
slows down but splits the log at full power.
Log splitter start button
ENGLISH
D22000400 v.3 UPD 190510

Publicidad

Tabla de contenido

Solución de problemas

loading

Productos relacionados para Bell Logic

Tabla de contenido