BSV BSPOOL PRO400 Manual De Usuario página 27

1.2- Technical specifications
1.2.1- Equipment
Models
PRO400
230Vac
Supply voltage
50/60Hz
Chlorine
production 400
g/hour
Max. power 2700W
Cell current 36A
Dimensions
Weight 30Kg
Protection IP57
1.2.2 – Common characteristics on the PRO units
Adjustment of chlorine production by switched mode power supply
Power supply performance >90%
Automatic switch-off owing to lack of water flow
Automatic voltage adjustment depending on the concentration of salt and the
temperature, keeping continuous chlorine production.
Automatic cleaning cycle of electrodes.
Automatic restart in the event of supply failure.
1.3- Recommendations and safety precautions
The equipment should always be installed by qualified staff.
Disconnect the equipment from the mains before performing any assembly or
maintenance operation.
Make sure that the electrical installation has all compulsory protection elements
(circuit breaker and differential switch) in perfect condition.
It is important to ensure that the supply cables of the electrolysis cell are tightly
connected, otherwise the equipment could overheat and break down.
Ensure that the heatsink wings are not blocked and that air can easily circulate
through them.
BSV PRO equipment incorporate protection systems against short circuits in the
cell, absence of water detector and other safety systems that give an acoustic
and visual alarm in the event of any anomaly. However, for optimum results,
you should ensure the correct hydraulic operation of your swimming pool.
Manual PRO v.1
PRO500 PRO600
230Vac 230Vac
50/60Hz 50/60Hz
500 600
3500W 4050W
45A 36A
30Kg 30Kg
IP57 IP57
PRO750 PRO1000
230Vac 230Vac
50/60Hz 50/60Hz
750 1000
5250W 7000W
45A 45A
40Kg 50Kg
IP57 IP57
27 / 46