caution!
Care and cleaning
• Before maintenance, switch off the appliance and disconnect
the mains plug from the mains socket.
• Do not clean the appliance with metal objects, steam
cleaner, ethereal oils, organic solvents or abrasive
cleansers.
• Do not use sharp objects to remove frost from the appliance.
Use a plastic scraper.
Installation Important!
• For electrical connection carefully, follow the instructions
given in this manual.
Unpack the appliance and check if there are damages on it.
• Do not connect the appliance if it is damaged. Report
possible damages immediately to the place you bought it. In
this case retain packing.
• It is advisable to wait at least four hours before connecting
the appliance to allow the oil to flow back in the compressor.
• Adequate air circulation should be around the appliance,
lacking this leads to overheating. To achieve sufficient
ventilation, follow the instructions relevant to installation.
• Wherever possible the back of the product should not be too
close to a wall to avoid touching or catching warm parts
(compressor, condenser) to prevent the risk of a fire, follow
the instructions relevant to installation.
• The appliance must not be locate close to radiators or cookers.
• Make sure that the mains plug is accessible after the
installation of the appliance.
Service
• Any electrical work required to do the servicing of the
appliance should be carried out by qualified electrician or
competent person.
• This product must be serviced by an authorized Service
Center, and only genuine spare parts must be used.
1)If the appliance is Frost Free.
2)1f the appliance contains freezer compartment.
7