Descargar Imprimir esta página

Hisense RT161D4ADE Manual De Operación página 28

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 102
| l nstallingyour newappliance
Before using the appliance for the first
time, you should be informed of the
following tips.
Ventilation of appliance
In order to improve efficiency of
� the cooling system and save
energy, it is necessary to maintain
good ventilation around the appliance
for the dissipation of heat. For this
reason, sufficient clear space should
be available around the refrigerator.
Suggest: It is advisable for there to be
at least 50-?0mm of space from the
back to the wall, at least 100mm from
its top, at least 100mm from its side to
the wall and a clear space in front to
allow the doors to open 1 2 0
shown in following diagrams.
- �
-
O
O
L
Note:
• This appliance performs well within
the climate class from N to ST .
It may not work properly if being left at
a temperature above or below the
indicated range for a long period.
Climate class
Ambient temperature
SN
N
ST
T
. As
°
100
k
C
6
\\
\ \
790
°
°
+10
C to +32
C
°
°
+16
C to +32
C
°
°
C
+16
C to +38
°
°
+16
C to +43
C
• Stand your appliance in a dry place to
avoid high moisture.
• Keep the appliance out of direct
sunlight,
rain or frost. Stand the
appliance away from heat
such as stoves, fires or heaters.
Leveling of appliance
• For sufficient leveling and air
circulating in the lower rear section of
the appliance, the bottom feet may
need to be adjusted. You can adjust
them manually by hand or by using a
suitable spanner
• To allow the doors to self-close, tilt
the top backwards by about 10 mm.
sources
: �10mm
8

Publicidad

loading