Publicidad
Idiomas disponibles
Idiomas disponibles
Zone selection
The centralita allows you to link up to 30 sensors, and differentiate
them between three zones (10 sensors per zone). Before installing the
sensors, it is important to understand how the zones work, because
depending on the use we want to give the sensor, we will install it in
zone 1, 2 or 3.
First of all, the zones can work in two ways, normal zones or
independent zones, and each one of them allows us to use the alarm
in a different way according to our needs:
- Normal zones
In this mode, the three zones will work equally with the sound you
select, you can choose between 5 sounds, low alarm, high alarm,
low tone, high tone and silence.
When the alarm goes off, you will know which sensor, or to which
group of sensors does the sensor belong that caused the alarm to
go off, because the led indicator of the zone that has gone off will
flash.
You can change the alarm sound at any time with the remote
control and all zones will warn with the selected sound.
All zones will notify you when the alarm is armed, but not when it is
disarmed.
22
Publicidad
