Descargar Imprimir esta página

Russell Hobbs 24820-56 Instrucciones página 5

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 18
3.
Press the
button (you're using the "shot of steam" function vertically).
4.
Leave 4 seconds between shots, to let the temperature build up.
AFTER USE
1.
Set the temperature control to •.
2.
Unplug the iron.
3.
Open the cover.
4.
Hold it over a sink, turn it upside down, and drain the water from the reservoir, via the
water inlet.
5.
Close the cover.
6.
Sit the iron on its heel.
7.
Leave it to cool down completely.
8.
When it's cold, wipe off any moisture, and wind the cable round the heel.
9.
Store the iron on its heel, to avoid corrosion and damage to the soleplate.
CLEANING
1.
Unplug the iron, and sit it on its heel to cool.
2.
Clean the outside surfaces of the appliance with a damp cloth.
3.
Remove spots from the soleplate with a little vinegar.
ENVIRONMENTAL PROTECTION
W
To avoid environmental and health problems due to hazardous substances in electrical
and electronic goods, appliances marked with this symbol mustn't be disposed of with
unsorted municipal waste, but recovered, reused, or recycled.
5

Publicidad

loading