Safety Information
S.I. 2008/1597 (Annex I, clauses 1.1, 1.2 (excluding 1.2.4.3),
1.3, 1.4, 1.5, 1.6, 1.7)
And that this partly completed machinery is in conformity
with the provisions of the following other UK Regulation(s):
This partly completed machinery must not be put into service
until the final machinery into which it is to be incorporated
has been declared in conformity with provisions of The Sup-
ply of Machinery (Safety) Regulations 2008 S.I. 2008/1597,
where appropriate.
The following (parts/clauses of) Designated Standards have
been applied:
DIN EN ISO 12100:2010
The relevant technical documentation was compiled and was
communicated in accordance with The Supply of Machinery
(Safety) Regulations 2008 S.I. 2008/1597 part B of Annex
VII. Authorities can request the technical file in electronic
form from:
Aleksandra Duric, Product Compliance Manager, Atlas
Copco Industrial Technique AB, SE-105 23 Stockholm Swe-
den
Stockholm, 1 September 2023
Håkan Andersson, Managing Director
Signature of issuer
Authorised Representative UK
James McAllister, General Manager
Atlas Copco Ltd
Swallowdale Lane
Hemel Hempstead
Hertfordshire HP2 7EA
Safety
WARNING Risk of Property Damage or Severe In-
jury
Ensure that you read, understand and follow all instruc-
tions before operating the tool. Failure to follow all the
instructions may result in electric shock, fire, property
damage and/or severe bodily injury.
Read all safety Information delivered together with
►
the different parts of the system.
Read all product Instructions for installation, opera-
►
tion and maintenance of the different parts of the
system.
Read all locally legislated safety regulations with re-
►
gard to the system and parts thereof.
Save all safety information and instructions for fu-
►
ture reference.
4
© Atlas Copco Industrial Technique AB - 9834 4191 00
Statement of use
This motor is designed to be incorporated into a fixed or mov-
ing machine. It is either for right hand rotation only, left hand
rotation only, or reversible rotation and should be mounted by
the flange or threaded nose only, as appropriate. No other use
permitted. For professional use only.
The risk of motors being the source of ignition of a poten-
tially explosive atmosphere is extremely small. The user is re-
sponsible for assessing the risks associated with the whole
machine into which the motor is to be incorporated.
Product specific instructions
Warning
WARNING Polymer hazard
The vanes in this product contain PTFE (a synthetic fluo-
ropolymer). Due to wear, there might be PTFE particles
inside the product. Heated PTFE can produce fumes
which may cause polymer fume fever with flu-like symp-
toms, especially when smoking contaminated tobacco.
Health and Safety recommendations for PTFE must be
followed when handling vanes and other components:
Do not smoke when servicing this product
►
PTFE-particles must not come in contact with open
►
fire, glow or heat
Motor components must be washed with cleaning
►
fluid and not blown clear with an air line
Wash your hands before starting any other activity
►
Installation diagram
Reversible motor
Connecting the air supply
When the compressed air supply is connected to the inlet, the
direction of rotation will be as shown in the figure below. If
the exhaust air is to be piped away, a hose should be con-
nected to the exhaust outlet.
The compressed air supply should be connected to the corre-
sponding inlet for desired rotation direction, see figure below.
The inlet that is not in use, functions as an additional outlet
and must not be plugged.
LZB33-L-AR005-50