Maintenance
Chart
Every 8 Hours or Daily
Check safety interlock system
Clean debris off tractor and mower deck
Clean debris from engine compartment
Every 25 Hours or Annually *
Check tire pressure
Check mower blade stopping time
Check tractor and mower for loose hardware
Every 50 Hours or Annually
*
Clean battery and cables
Check tractor brakes
See Dealer Annually
to
Lubricate tractor and mower
Check mower blades H
* Whichever comes first
** Check blades more often in regions with sandy soils or
high dust conditions.
!! !! ii!ii : !i i!!i!!i!i!i! ! i ! !!i!i !i ii!ii i!i!iiii! i! !i! !i!
Change engine oil
Check engine oil level
Every 25 HoUrs oF Annually
* .................
Clean engine air filter and pre-cleaner **
Change engine oil
Replace oil filter
Replace air filter
Replace pre-cleaner
Dealer Annually
hspect muffler and spark attester
Replace spark plug
Replace fuel rifler
Clean engine air cooling system
" Whichever comes first
_ Clean more often in dusty conditions or when airborne
debris ms present.
WABNmNG
Unintentional sparking can result in fire or electric
shock.
Unintentional start-up can result in entanglement.
traumatic amputation
or laceration.
Before performing
adjustments
or repairs:
o
Disconnect the spark plug wire and keep it away from
the spark plug.
o
Disconnect battery at negative terminal (only engines
with electric start).
o
Use only correct tools.
o
Do not tamper with governor spring, links, or other
parts to increase engine speed.
o
Replacement parts must be of the same design and
installed in the same position as the original parts.
Other parts may not perform as well, may damage the
unit, and may result in injury.
o
Do not strike the flywheel with a hammer or hard object
because the flywheel may shatter during operation.
Check
Tire Pressure
Tires should be checked periodically to provide the optimum
traction and to guarantee the best cut (see Figure 4).
NOTE: These pressures may differ slightly from the
"Maximum Inflation" stamped on the side walls of the tires.
Check
Mower
Blade Stopping
Time
WARNING
If the mower blade does not come to a complete
stop within 5 seconds, the blade must be adjusted. Do not
operate the machine until the proper adjustment has been
9erformed by an authorized dealer.
Check the mower blade for proper function (see Safety
Interlock
System Tests). The blade should stop rotating in
5 seconds or less after moving the blade control to the OFF
position.
20
www°snapper°eom