Publicidad
2
English
3. The "Welcome" screen will appear. Click "Next". Please read the
"VIA Service Pack readme" carefully before proceeding to step 4.
4. Follow the prompts on the screen to complete the installation.
5. Reboot the system for the drivers to take effect.
2.3.2 VIA LAN Drivers (PE21-EL and PE21-EL/A only)
The LAN drivers support autorun for the following operating
systems: Windows
Windows
To install the LAN driver, please follow the steps below.
1. Click "VIA LAN Drivers".
2. Follow the prompts on the screen to complete installation.
3. Reboot the system for the driver to take effect.
The LAN driver for Windows NT
Once the system has detected the fast ethernet controller, it will
prompt you to install the driver for the operating system you are
using. The driver is in the "Landrv" root directory of the CD.
2.3.3 VIA USB 2.0 Drivers
To install the USB 2.0 driver, please follow the steps below.
1. Click "VIA USB 2.0 Drivers".
2. Follow the prompts on the screen to complete installation.
3. Reboot the system for the driver to take effect.
2.3.4 Realtek Audio Drivers
The audio drivers are supported in the following operating systems:
Windows
and Windows
46
98 SE, Windows
XP.
98, Windows
98 SE, Windows
2000.
ME, Windows
4.0, does not support "Autorun".
ME, Windows NT
2000 and
4.0
Publicidad
