Publicidad
2
English
2.3.6 Microsoft DirectX 8.1 Driver
1. Insert the CD that came with the mainboard package into a
CD-ROM drive. The autorun screen (Main Board Utility CD) will
appear.
2. Click "Microsoft DirectX 8.1 Driver".
3. Click "Yes" to continue.
4. Follow the prompts on the screen to complete installation.
5. Restart the system.
2.3.7 OverClock Cruise
OverClock Cruise is an application program that allows you to set
the CPU clock of the system.
1. To run the program, click "OverClock Cruise" on the autorun
screen.
2. The large digits in the middle of the screen is the current CPU
clock. Use the scrollbar below it to manually adjust the desired
CPU clock, then click the "Run" button. The change will take effect
only if this button is clicked. Note that the "CPU Ext Clock",
"AGP Clock" and "PCI Clock" will change accordingly.
3. To automatically adjust the CPU clock, click the "Autorun" button.
When it reaches your desired CPU clock, click the button again
to stop. Otherwise, the CPU clock will continue to increase until
it exceeds its maximum causing the system to restart. The system
will start with the speed that is most stable before it hanged.
4. To save the current setting, click the "Save" button. A screen will
appear allowing you to save the setting.
Before you click "Save", make sure the "Run" button was clicked
after you have selected the CPU clock. You will not be able to
save the setting if the "Run" button was not clicked.
48
Publicidad
