Grundig M18-C Manual Del Usuario página 2

a speypuscauts a antes a srerrerpace esi ae ce anaes sauigeaasenes
eC oan meee aes
IMPORTANT NOTES FOR USERS IN THE U.K.
Mains plug
This apparatus is fitted with an approved moulded 13 Amp plug. To
change a fuse in this type of plug proceed as follows:
¢. Remove fuse cover and fuse.
e Fix new fuse which should be a BS1362 5 Amp, A.S.TA. or BSI
approved type.
© Retit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be cut
off and an appropriate plug fitted in its place.
if the mains plug contains a fuse, this should have a value of 5 Amp.
if a plug without a fuse is used, the fuse at the distribution board
should not be greater than 5 Amp.
Note: The severed plug must be disposed to avoid a possible shock
hazard should if be inserted into a 13 Amp socket elsewhere.
How to connect a plug
The wires in the mains-lead are coloured with the following code:
blue = neutral (N}, brown '= live (L).
As these colours may not correspond with the colour markings
identifying the terminals in your plug, proceed as follows:
© Connect the blue wire to the terminal marked N or coloured
black.
© Connect the brown wire to the terminal marked L or coloured red.
© Do nof connect either wire to the earth terminal in the plug,
marked E {or e) or coloured green {or green and yellow).
Before replacing the plug cover, make certain that the cord grip is
clamped over the sheath of the lead — not simply over the two wires.
Copyright in the U.K.: Recording and playback of material may
require consent. See Copyright Act 1956 and The Performer's
Protection Acis 1958 to 1972.
sigur
coerce erent
CLASS 1 :
LASER PRODUCT fi