Joie i-Snug 2 Manual De Instrucciones página 6

The completely assembled base is
shown as
10
!
The ISOFIX connectors must be
attached and locked onto the
ISOFIX anchor points. -1
10
!
The load leg must be installed
correctly with green indicator.
-2
10
8. Push the infant carrier module
down into the base , if the
11
enhanced child restraint is secure,
the enhanced child restraint
indicator shows green.
12
!
Press the recline adjustment
button, and adjust the enhanced
child restraint to the proper
position. There are 7 recline angles
with rearward facing mode.
!
The most convenient way to install
the infant carrier module is when
th
the base is in the 7 position.
!
Pull up on the infant carrier module
to be sure it is securely latched into
the base.
7
10
2
1
11
12
9. To release the infant carrier
module, pull the infant carrier
module up while squeezing the
infant carrier module release
button.
13
10. To remove the base, press the
secondary lock button first
and then the button on the ISOFIX
connectors before removing
the base from the vehicle seat.
14
11.Press the ISOFIX release button to
store the ISOFIX.
15
13
2
1
14
2 1
15
2
1
8