Description; Product Specifications; Assembly - QEP 83200Q Instrucciones De Funcionamiento

Pivoting cutting
rail for easy
miter cuts
Handle for
easy transport
fIgurE 3

DESCRIPTION

Before attempting to use any tool, be sure to
familiarize yourself with all the operating features
and safety instructions .
KnOW yOUr SaW
Your tile saw has many built-in features (see
FIGURE 3) for fast, efficient cutting of ceramic,
porcelain, marble, slate or limestone wall or floor
tile . The durable 8 inch blade cuts tile up to 1-1/2 in .
thick . The built-in handle allows easy transporting .

PrOdUCt SPeCiFiCatiOnS

Input: 9.2 Amps
No-load Speed: 3550 rpm
Output: 1-1/2 hp motor
Blade Diameter: 8 in. (203 mm)
Arbor: 5/8 in.
Rating: 120 volts~60 hz Ac
Depth of Cut: 1 1⁄2 in. (31 mm)

ASSEMBLY

ASSEMBLY AND OPERATION INSTRUCTIONS
COMPLETELY BEFORE CONNECTING THE SAW TO
A POWER SOURCE OR TURNING THE MOTOR ON.
Guided by ball bearing
wheels for smooth cutting
Legs fold under for
practical table top use
FOLLOW ALL OF THE
Dual waterfeed
increases blade life
Laser guide for
precision cutting
UnPaCKinG
1 . Remove all packing materials from around
your saw .
2 . Carefully lift the saw from carton and place
it on a level work surface .
3 . Do not discard the packing materials until
you have carefully inspected the saw for
loose or damaged parts .
The following items are included in box with
your tile saw:
• Fold-out stand with wheel attachments
• 8 in. continuous rim wet diamond blade
for porcelain
• High volume water pump
• Rear wheel attachments
• Laser cutting guide
• Angle/rip cutting guide
• Handles
• Hexagonal Blade Wrench
• Motor Shaft Holding Wrench
• Screwdriver
4 . Inspect the saw carefully to make sure
that no breakage or damage has occurred
during shipping . If any parts are damaged
or missing, return the saw to your place of
purchase .
– 5 –
High volume water pump
keeps blade cool
Fold out stand with
wheel attachments
for easy mobility