Publicidad
Idiomas disponibles
Idiomas disponibles
Quick Setup Guide
Get Started: Connect scanner with your device via USB cable. If you use US
keyboard, it's plug and play. If you use other type of keyboard , please refer to
"keyboard language" to set the keyboard language before use it.
Programming Code
Netum barcode scanners are factory programmed for the most common
terminal and communications settings. If you need to change these settings,
programming is accomplished by scanning the bar codes in this guide. An
asterisk (**) next to an option indicates the default setting.
Important Notes:
All configurations need to go through below steps except Factory Defaults.
Scan "Enter Setup" → "Programming Code" →"Exit Setup"
Enter Setup
** Exit Setup
If scanner has exited the setup mode, none programming codes can be read.
Factory Defaults
Configures the scanner to revert all settings to factory defaults.
Factory Defaults
(1)
Publicidad
