GSE SD40 Manual Del Usuario página 26

Connect the Timer Box IV to the power.
The power LED blinks and initialize This takes a few seconds. First you will
see a screen with all the LCD segments and the back-light working.
Next it starts initializing the sensor and in case this screen stays at this stage,
there is a fault with the sensor or the communication it self.
With the rotary push button you can navigate through the menu. Turn
clockwise to go to the next step or increase values, or counter clock wise to return
or decrease values. Push on the knob to SELECT and SAVE.
Entering/Exit to the settings main menu
Push the knob once, the 1. RETURN segment starts to blink. Pushing again
you return ro the main screen.
Once entered into the settings main menu turn clockwise once the button.
The day segment starts to blink. Push the knob once to enter the day counter. You
can increase or decrease the day counter. Set it to day 1 on your first day of the
plant cycle. Confirm and save your settings by pushing the knob once. Now you
return to the settings main menu and the day segment blinks.
Turn the button clockwise and the 20. Current time setting starts to blink.
Push once on the knob to enter the 17. Hours settings. You can increase or
decrease the current time "hours". Push to save and the 8. Minutes starts to blink.
Repeat this for the minutes and push to save and return to the main menu
settings.
Turn the button clockwise and the 2. Start time will start to blink. Push the
knob once to enter the 17. Hours settings. You can increase or decrease the
Start/ON time "hours". Push to save and the 8. Minutes starts to blink. Repeat this
for the minutes and push to save and return to the main menu settings.
Turn clockwise once on the button and the 4. 12h ON cycle starts to blink.
Push once on the knob to choose a 12h light cycle and return to the settings main
menu.
(This is a fast choice of a 12h cycle starting from the Set Start/ON time and
has a 12 hours ON duration).
Turn clockwise once on the button and the 5. 18h ON cycle starts to blink.
Push once on the knob to choose a 18h light cycle and return to the settings main
menu.
(This is a fast choice of a 18h cycle starting from the Set Start/ON time and
has a 18 hours ON duration).
Timer box IV
Initializing
Navigation
Set day time counter
Set current time
Set Start/ON time
Set 12h ON cycle
Set 18h ON cycle
EN
23