Publicidad
Idiomas disponibles
Idiomas disponibles
This feature allows you to enjoy the benefits of Dolby
Pro Logic by using the speakers of the projection TV as
the center speaker. To utilize this system you must
connect an amplifier that is Dolby Pro Logic
compatible. Connect the speaker wires from the
amplifier's center channel output terminals to the
projection TV's CENTER SPEAKER IN. Both right and
left terminals must be connected to receive an audio
signal. After making the above connections, select
"SPEAKER: CENTER" in the MODE SET menu (page
27). The left and right audio channels can be heard
through your audio system speakers.
In this connection, adjust the volume with your
amplifier.
Notes
e Always match the speaker cord and terminal colors when
making the connections.
© Unplug the projection TV when making the connections. If the
exposed speaker cord wires touch while the projection TV is
plugged in, the projection TV may short-circuit and be
damaged
e Donot pull on the speaker cords.
e Always turn off the amplifier power before connecting to the
CENTER SPEAKER IN terminals.
(Rear of projection TV)
Connect the other end of the cords to
the input terminals of the corresponding
sueeters in the same way as shown
above.
Dolby Pro Logic-compatible
amplifier
* Manufactured under license from Dolby Laboratories
Licensing Corporaion. Additionally licensed under one or
more of the following patents: U.S. numbers 3,632,886,
3,746,792 and 3,959,590. "Dolby" and the double-D symbo! 00
are trademarks of Dolby Laboratories Licensing Corporation.
Connecting external speakers as rear speakers
If you connect optional speakers mounted to a rear
wall, you can obtain a surround effect. After making
the connections, select "REAR SPEAKER: YES" in the
SET UP menu (page 28).
Notes
e External speakers must be rated at more than 8 ohm
impedance.
» Always match the speaker cord and terminal colors when
making the connections.
» Unplug the projection TV when making the connections. If the
exposed speaker cord wires touch while the projection TV is
plugged in, the projection TV may short-circuit and be
dama
® Do not pull on the speaker cords.
(Rear of projection TV)
Getting Started | 44-EN
Publicidad
