Publicidad
Idiomas disponibles
Idiomas disponibles
4 Press the rocker control up or down to
move the cursor (>) to the symbol showing
the line you want to adjust, and click the
rocker control.
I: Red vertical line (left/right adjustment)
Red horizontal line (up/down adjustment)
|: Blue vertical line (left/right adjustment)
Blue horizontal line (up/down adjustment)
Press the rocker control up or down to
move the line until it converges with the
center green line, and click the rocker
control.
=
To move up/right, press the rocker control up.
To move down/left, press the rocker control down.
GEICONVERGENCE
Repeat steps 4 and 5 to adjust the other
lines until all three lines converge and are
seen as a white cross.
white cross
SELECTED RETNED EXIT
7 Press MENU to return to the original screen.
Note
© If more than 90 seconds elapse after you press a button, the
menu disappears automatically.
Step 5: Setting
ts} 0) (=m AV Are) aie) ae) ai
If you have connected the projection TV to a cable TV
system, you should set the cable connection on or off.
Set CABLE to ON, the factory setting, to preset or
watch cable TV channels. Set to OFF to preset or watch
VHF/UHF channels.
1 Press MENU.
The main menu appears.
>GOPROG
PALETTE
GQMODE
SET
2 Press the rocker control up or down to
move the cursor (>) to SET UP and click the
rocker control.
The SET UP menu appears.
=
Hd
REAR SPEAKER:
NO
FAVORITE
CHANNEL
MENU
(continued)
Getting Started | 43-EN
Publicidad
