Publicidad
Idiomas disponibles
Idiomas disponibles
3 Press the rocker control up or down to
move the cursor (>) to AUTO PROGRAM and
click the rocker control.
"AUTO PROGRAM" appears on the screen and the
projection TV starts scanning and presetting
channels automatically. When all the receivable
channels are stored, "AUTO PROGRAM"
disappears and the lowest numbered channel is
displayed.
Notes
e If AUTO PROGRAM appears in black in the SET UP menu, the
projection TV is set to a video input and you cannot select
AUTO PROGRAM. Press TV/VIDEO on the remote
commander until a channel number appears.
¢ To preset pay cable TV channels input from the AUX
(auxiliary) terminal, first press ANT/AUX to display "AUX"
beside the channel number. Then follow steps 1 to 3.
e If more than 90 seconds elapse after you press a button, the
menu disappears automatically.
Erasing or adding channels
1 press MENU.
2 press the rocker control up or down to
select SET UP and click the rocker control.
3 press the rocker control up or down to
select CH ERASE/ADD and click the rocker
control.
Erase and/or add the channel you want:
To erase an unwanted channel
(1) Make sure the cursor () is beside ERASE.
(2) Press CH + or — to select the channel you want
to erase.
Selected channel number
(CH ERASE/ADD
"00
CH
Setect
the
en anee le
iad
HANNEL +
(onsleleNteR]
RETURNED
ges
(3) Click the rocker control.
The indication "—" appears beside the channel
number, showing that the channel is erased
from the preset memory.
To add a channel that you want
(1) Press the rocker control up or down to select
ADD.
(2) Press 0 — 9 button to select the channel you want
to add and press ENTER.
Selected channel number
SICH ERASE/ ADO
ERASE
ADD
a A
the channel.
El
NEL +/~
ADDS 'Toss s ENTER]
serecte> neTewcp xit GED
(3) Click the rocker control.
The indication "+" appears beside the channel
number, showing that the channel is added to
the preset memory.
5 to erase and/or add other channels, repeat
step 4.
6 when you finish, press MENU.
Notes
e If you erase
or add a VHF or UHF channel, the cable TV
channel with the same number is also erased or added, and
vice versa.
e Erasing and adding channels are also available for the AUX
input.
Setting S video on or off
1
2
Press TV/VIDEO to select VIDEO 1.
Press MENU.
Press the rocker control up or down to
move the cursor (>) to MODE SET and click
the rocker control.
Make sure the cursor (P) is beside S-VIDEO
and click the rocker control.
Press the rocker control up or down to
select ON or OFF and click the rocker
control.
6
Notes
If S-VIDEO appears in black in the MODE SET menu, press
TV/VIDEO until VIDEO 1 is selected.
e If you set S-VIDEO to ON, the projection TV automatically
receives S video signals whenever a VCR with S video is
connected.
Press MENU to return to the original screen.
Getting Started | 45-EN
Publicidad
