Powersmart DB2501 Manual De Instrucciones página 14

INSTALLING THE AUXILIARY HANDLE
WARNING:To avoid injury, adjust the auxiliary handle for optimum control and balance.
Do not overreach when operating t h e machine. Keep proper balance at all times for better
control of the tool in unexpected situations.
Install the M5 lock nut nut into the locking block.

Align the convex point on the locking block with the hole in the pipe and install it.

Cover the auxiliary handle.

Lock with 4 bolts (M5*30).

CONNECTING THE UPPER SHAFT AND THE TELESCOPIC SHAFT
Align the arrow on the upper handle (1) with the convex point (2) on the telescopic shaft and insert it

to the end.
Hold the upper handle and tighten the telescopic shaft.

INSTALLING THE SAFETY GUARD
To avoid injury, always remove the battery pack before installing the guard, changing a cutting line, or
making any adjustments.
14