cecotec BOLERO SQUAD I 3100 Manual De Instrucciones página 34

ENGLISH
NOTES:
A. If power is not set within 1 minute, the induction hob will switch off automatically.
You can change the power setting at any time during cooking.
B.
C. Slide your finger on the slider to adjust the power level from 0 to 9.
and the power setting alternately flash on the display
This can mean that
- you have not placed the cookware on the correct cooking zone;
- the cookware you are using is not suitable for the induction hob;
- the cookware is too small or is not correctly centred on the cooking zone.
If no suitable cookware is placed on the cooking zone, the latter will not switch on.
The display will automatically switch off after 1 minute if no cookware is placed on the hob.
After cooking
1. Press the cooking-zone selection touch icon of the zones you wish to switch off.
2. Turn off the cooking zone by sliding the slider to the left.
Make sure that the control panel displays "0" and then "H" for the corresponding cooking zone.
Switch the induction hob off by pressing the Power touch icon.
3.
4. Use caution with hot surfaces.
The "H" symbol indicates that the corresponding cooking zone is still hot. The H symbol will
disappear once the surface has cooled down and reached a safe temperature.
Cookware detection
The cookware detection system ensures product safety. The induction hob will not work in the
following cases:
If no cookware is on the cooking zone or if the cookware is not suitable for induction, it will
-
be impossible to increase the power and the display will show [ U ]. This symbol disappears
when the cookware is placed on the induction cooking zone.
- If the cookware is removed from the cooking zone, operation stops and the symbol [ U ]
appears. The symbol [ U ] disappears when the cookware is placed back on the cooking
zone. Cooking continues at the previously selected power level.
After use, make sure that the cooking zones are switched off. Do not leave the [ U ] symbol
active for too long.
Booster function
The Booster function allows to increase the power of a cooking zone for 5 minutes, this way
reducing cooking time.
B O LE R O S QUAD I 3 10 0/3 10 0 FULLFLE X/4100 FU LL F L EX
66
Enabling the Booster function
1. Press the cooking-zone selection touch icon to select the cooking zone whose power you
wish to increase: the corresponding indicator will flash.
Press the Booster touch icon to increase the power of the selected cooking zone.
2.
The control panel will display "P" to indicate that the corresponding cooking zone is running in
Booster mode.
3. The Booster function will last for 5 minutes, after which the cooking zone will return to
the power level selected before enabling the Booster function.
4. If during these 5 minutes you wish to disable the Booster function, press the cooking-
zone selection touch icon: an indicator next to the corresponding icon will flash. Then,
press the Booster touch icon or touch the slider. The cooking zone will return to the power
level selected before enabling the Booster function or to the power level of choice.
Operating instructions
The cooking zones are divided in two groups. If you want to enable the Booster function for a
single cooking zone of a group, you must first ensure that the other cooking zone in that same
group is running at power level 5 or lower to avoid overloading the hob.
Figure 11 shows how the cooking zones of models 02510_Bolero Squad I 3100 and 02511_Bolero
Squad I 3100 FullFlex are grouped.
Figure 12 shows how the cooking zones of model 02512_Bolero Squad I 4100 FullFlex are
grouped.
Bridge Zone for models 02511_Bolero Squad I 3100 FullFlex and 02512_Bolero Squad I 4100
FullFlex
- The Bridge Zone can be used as a single cooking zone or as two separate cooking zones,
based on your cooking needs.
- The Bridge Zone consists of two independent inductors that can be controlled separately.
If the Bridge Zone is used as two separate cooking zones, the cookware can be moved
from one zone to another while maintaining the same power level as the zone where the
cookware was originally placed, and the empty cooking zone will switch off.
Please note:
If you use the Bridge Zone as a single cooking zone, be sure to place the cookware in the centre.
In case of large, oval, rectangular, and oblong cookware, make sure to place it in such a way
that it covers both "+" as shown in Figure 13 (examples of good and bad cookware placements).
Using the Bridge Zone as a single large cooking zone:
To use the Bridge Zone as a single large cooking zone, press the corresponding Bridge-
1.
function touch icon.
BO LERO SQUA D I 3100/31 00 FULLFLEX/4100 FULLFLEX
ENGLISH
67