Publicidad
Idiomas disponibles
Idiomas disponibles
the measured values are related to exposure levels, this information does not allow to determine if additional-
measures are required.
• Health risk due to inhalation of airborne particles.
ATTENTION:
complete standstill.
Switching on and off:
The machine has been fitted with a voltage protection, this protection prevents the machine from unintendedly
being switched on while the machine is connected to the mains voltage.to turn on the saw, it is only necessary
to follow the steps below:
1. To switch on the machine press the on/off switch "I".
2. To switch the tool off, release the on/off switch "O".
Ripping:
IMPORTANT
start sawing before the machine reaches full speed.
Note: Unplug the machine and clean the table before leaving the work area.
ATTENTION:
the push tool to saw small parts.
Only leave the machine after switching off and when the saw blade has come to a
Before sawing, remove all nails and other metal objects from the workpiece, and never
Securely clamp the workpiece. Never attempt to saw extremely small workpieces. Use
FIGURA 9.1
36
Publicidad
