Publicidad
Idiomas disponibles
Idiomas disponibles
Table saw operation:
1. Always make sure that the riving knife has been adjusted properly.
2. Always use the push stick to guide the workpiece along the saw blade.
3. Check that the upper part of the saw blade is fully covered by the upper guard.
4. Check whether the upper table top is tightened firmly.
Dust extraction:
The dust extraction outlet together with an external vacuum cleaner takes care of the dust extraction of the
working surface.
•
Connect a vaccum cleaner on the dust extraction connection (24) at the back of the saw.
10. PREVENTIVE MAINTENANCE
ATTENTION
follow the recommendations below:
Maintenance and cleaning:
Before performing any cleaning or maintenance, unplug the tool from the power grid;
• Regularly clean lhe ventilation slots;
• Remove ali dust from the housing;
• Regularly check the machine for possible damages;
• Belore use always check the state of the saw blade. Particularly make sure that the saw blade is fastened
firmly and that there is no play on it;
• Before use always check the distance between riving knife and saw blade and between guard and saw blade.
Repairs:
If required to perform any repair or replacement of the electric motor brushes, contact the nearest Schulz assis-
tance. Original parts Schulz must be used. The use of non-original parts results in warranty loss and may cause
damage to the equipment or injury.
11. CORRECTIVE MAINTENANCE
To guarantee product SAFETY and RELIABILITY, repairs, maintenance and adjustments must be performed by the
nearest SCHULZ AUTHORIZED DEALER, which uses genuine parts.
To guarantee the perfect functioning and increase the lifespan of your equipment,
37
Publicidad
