Publicidad
Idiomas disponibles
Idiomas disponibles
Instructions for charging mobile phones, tablets and other USB devices
1 – Connect the main USB jack of 4in1 cable to USB 5V 2A output port of the starter.
2 – Select the appropriate connector for your mobile phone, tablet... and connect it to your device. Briefly press the
multifunction button to start the charging process. Indicator lights are lit when charging any device.
Multifunction LED flashlight
Hold the multifunction button for 3 seconds to activate the LED flashlight. Then, 3 LED lighting modes appear in
sequence by briefly pressing the multifunction button (normal flashlight / flashing light / SOS signal). Pressing the
button for the fourth time, the flashlight will turn off.
PARTS LIST
TECHNICAL SPECIFICATIONS
Parts name
1
LT-15 SMART starter
2
4in1 USB cable
3
Mains charger
4
12V charger
5
Jumper cable with SMART battery clamps
6
19V cable + 8 laptop adapters
7
Instruction manual
1
Size : 175x79x41mm
2
Weight : 505g
3
Outputs : USB 5V 2A / 19V 3.5A / 12V 10A / 12V
(starter)
4
Inputs : 14V 1A
5
Full charging time : 5 hours approx.
6
Start current : 300A
7
Peak current : 600A
8
Operating temperature : -20ºC ~ 60ºC
Qty
1
1
1
1
1
1
1
Publicidad
