cecotec TURBO EASYTOAST INOXDARK Manual De Instrucciones página 18

ESPAÑOL
Si detecta una incidencia con el producto o tiene alguna consulta, póngase en contacto con el
Servicio de Asistencia Técnica oficial de Cecotec a través del número de teléfono +34 96 321
07 28.
8. COPYRIGHT
Los derechos de propiedad intelectual sobre los textos de este manual pertenecen a CECOTEC
INNOVACIONES, S.L. Quedan reservados todos los derechos. El contenido de esta publicación no
podrá, ni en parte ni en su totalidad, reproducirse, almacenarse en un sistema de recuperación,
transmitirse o distribuirse por ningún medio (electrónico, mecánico, fotocopia, grabación o
similar) sin la previa autorización de CECOTEC INNOVACIONES, S.L.
34 TURBO EASYTOAST INOXDARK
1. PARTS AND COMPONENTS
Fig. 1.
1. Crumb tray
2. Power regulator
3. On/Off button
4. Resistors
5. Toasting rack
6. Cord management hooks
Please note
The graphics in this manual are schematic representations and may not exactly match the
product.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent product damage when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the Technical Support Service of Cecotec
immediately.
- Remove all stickers and wipe the outside of the toaster with a damp cloth. Make sure no
packaging materials remain in the toasting slot and no object has fallen inside the toaster.
- Place the flatbed toaster on a flat, stable, dry, and heat-resistant surface. Do not place
the device near heat sources, places with high humidity levels, or combustible materials.
3. OPERATION
- Make sure that the crumb tray is correctly positioned before using the flatbed toaster. It
is located underneath the heating elements and can be pulled out from the side of the
toaster opposite to the control panel.
- Plug the flatbed toaster to a power outlet.
- Select the desired intensity level with the power regulator. The intensity can be adjusted
before pressing the on/off button or immediately after.
ENGLISH
TURBO EASYTOAST INOXDARK 35