MIYOTA JS06 Manual Del Usuario página 2

2. Separated Parts
Setting stem
Length from movement
center to far end of
setting stem
Thread
3. Others
* Measurement of time rate
The unit(gate) time of measurement must be set at "10 sec." or integer fold value of 10 sec. Owing to
the DFC system, and the measurement must be performed in the form of complete watch.
* Marking on movement
* Typical clearance
Mov't - Caseback
Top of hands - Glass
* subject to the glass, case structure, and the length of hand
4. Instruction Manual
【Displays and Buttons】
Stopwatch
Minute Hand
Stopwatch
Second Hand
A) SETTING THE TIME
1. Pull the crown out to the 2nd Click Position.
2. Turn the crown to set hour and minute hands.
3. After the time has been set, push the crown back to the Normal position.
065- 505
Ф0.9mm×11.68mm
JAPAN
MIYOTA CO.
( CAL. NO.)
NO JEWELS
minimum 150 microns
300 - 400 microns *
×1
20.03mm
Button A
Normal Position
1st Click Position
24 Hour Hand
Button B
Second Hand
2nd Click Position