Bosch Zamo Manual Original página 22

22 | English
Do not direct the laser beam at persons or an-
imals and do not stare into the direct or reflec-
ted laser beam yourself. You could blind some-
body, cause accidents or damage your eyes.
If laser radiation hits your eye, you must close your eyes
u
and immediately turn your head away from the beam.
Do not make any modifications to the laser equipment.
u
Have the measuring tool serviced only by a qualified
u
specialist using only original replacement parts. This will
ensure that the safety of the measuring tool is maintained.
Do not let children use the laser measuring tool unsu-
u
pervised. They could unintentionally blind themselves or
other persons.
Do not use the measuring tool in explosive atmospheres
u
which contain flammable liquids, gases or dust. Sparks
may be produced inside the measuring tool, which can ig-
nite dust or fumes.
Product Description and
Specifications
Intended Use
Digital laser measure
The measuring tool is intended for measuring distances,
lengths, heights and clearances, and for calculating areas.
The measuring tool is suitable for indoor use.
This product is a consumer laser product in accordance with
EN 50689.
Laser line adapter
The laser line adapter is intended to be used in combination
with the Zamo digital laser measure for vertical or horizontal
1 609 92A 7Z2 | (14.04.2023) Bosch Power Tools