Bosch Zamo Manual Original página 28

28 | English
Charging nickel metal hydride
rechargeable batteries
CAUTION! You must charge only nickel metal hy-
dride batteries. Otherwise, an error message will
appear on the display.
To ensure full capacity of the batteries, completely charge the
batteries before the first use.
To charge nickel metal hydride batteries, use a USB Type-
u
C® cable (e.g. 1 600 A01 L6H (accessory)).
Recommended power supply unit: See technical data.
Pay attention to the mains voltage. The voltage of the
u
power source must match the voltage specified on the rat-
ing plate of the power adaptor. Power adaptors marked
with 230 V can also be operated with 220 V.
For more information, you can access the online op-
erating instructions at www.bosch-pt.com/manuals
Fitting/removing the adapter
Fitting the adapter
– Attach the adapter to the laser measure so that it clicks into
place.
Removing the adapter
– To remove the adapter, press the release buttons (6) and
take off the adapter.
1 609 92A 7Z2 | (14.04.2023) Bosch Power Tools