Hazet-Werk 7000 sTAC Serie Instrucciones De Uso página 28

8 .5 Memory
Every screw action is stored in the memory according to an
identification number (ID) specifying the date, time, duration of
the screw action, target values programed (with workflow and
parameter number where applicable), actual values tightened to
and the validation. The memory has 3000 memory slots.
NOTE! If you work with workflows and parameters or
the torque check or rotation angle check functions,
each memory location has 2 pages that can be dis-
played with
NOTICE! The storage symbol on the display denotes
the storage capacity. If all memory slots are full, the
following is displayed along with a yellow light sig-
nal: Memory full – data will be lost beginning from
next measurement!
This means the next measurement performed will not be dis-
played, validated or stored in memory. If you confirm this mes-
sage by pressing and
data records saved are deleted from the memory. The same
message is displayed as soon as the memory is full again.
The "Memory" menu option enables the data records in the
memory to be displayed and deleted individually or to be deleted
altogether.
1. To access the "Memory" menu option, press
menu.
2. Keep pressing
menu option.
3. Pressing accesses the "Display values" menu option
and the "Delete values" or "Delete all" menu options.
Use to select the required menu option. The menu
option selected is shown with a yellow background.
4. Pressing accesses the menu option selected.
5. "Display values": displays saved data records starting
with the last value saved. You can use the identification
number, the date and time to assign the data saved to
your screw action. Pressing
the data for individual screw actions.
NOTE! If no data is stored in the memory, "Memory
empty" appears. Confirm by pressing
return to the menu
6. "Delete values": individual data records (IDs) can be
deleted in this menu option.
7. Press and then use
want to delete. Confirm the selected ID with
"Delete values" appears.
8. Press to delete the selected ID.
9. "Delete all": this menu option allows you to delete the
entire memory contents. After confirming with
all" is displayed again so the user can be absolutely sure
of the deletion. The entire memory contents are not
deleted until
played and then "All deleted". Press
"Memory" menu option.
28

Design and function
.
simultaneously, the first 150 of 3000
until you can access the "Memory"
enables you to retrieve
to select the IDs that you
is pressed again. "Please wait" is dis-
to return to the
8 .6 Entering / changing the code
The menu and the settings of the torque wrench with built-in
angle gauge can be blocked to prevent unintentional adjustment
and undesired manipulation of programs by unauthorised per-
sons. A code is required to block and unblock the menu.
NOTE! The factory set code is "0000".
Select your own 4-digit code.
CAUTION! Make a note of your new 4-digit code and
have it available when required. If you lose your 4-digit
code, please contact your HAZET Service Centre quot-
ing the serial number of the torque wrench with built-in
angle gauge.
10. Press
11. Keep pressing
option.
12. Press
13. "Old, 0000" is displayed. The first digit is highlighted.
14. You must enter the old code before entering a new code.
You can change the highlighted code digit with
. Confirm the entry with
lighted. Change the other highlighted digits in the same
way, by pressing
NOTE! When entering your new code for the very first
for the
time, confirm the factory setting of "Old 0000" by
pressing
digit by digit.
15. "New, 0000" is displayed. The first digit is highlighted.
16. Enter your new code by changing the highlighted digits by
pressing
17. After the last confirmation with
displayed. The new code is saved.
8 .7 Blocking menu access:
18. Press
19. Keep pressing
access" menu option.
20. Press
21. Press
. Use to
highlighted.
22. Enter the code by changing the highlighted code digits
with
highlighted. Change the other highlighted digits the same
way, by pressing
and
23. After the last confirmation with
Block.
24. Pressing
option.
, "Delete
NOTE! Pressing
settings can be changed or configured. The start dis-
play is shown.
25. You can now only work with the settings programed,
and can only switch the torque wrench with built-in angle
gauge on and off and re-enable access to the menu with
the appropriate code.
to access the menu.
until you can access the "Code" menu
for the "Code" menu option setting range.
, then the next digit is high-
and confirming with
four times. The positions are highlighted
and confirming with
, menu option "Code" is
to access the menu.
until you can access the "Menu
. "Block" is displayed.
. "Code, 0000" is displayed. The first digit is
. Confirm the entry with
and confirming with
, you return to display:
once returns you to the "Menu access" menu
again blocks the menu. No further
.
.
. The next digit is
.