Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Rough-In Dimensions
(68.6 cm)
*NOTE: With pedestal, 133.6 cm
Stacked, 213.4 cm
Unpacking the Washer
WARNING!
•
Recycle or destroy the carton and plastic bags after the washer is unpacked.
Make materials inaccessible to children. Children might use them for play.
Cartons covered with rugs, bedspreads or plastic sheets can become airtight
chambers causing suffocation.
1.
Cut and remove the top and bottom packaging straps.
2.
While it is in the carton, carefully lay the washer on its side. DO NOT lay the washer on
its front of back.
3.
Turn down the bottom flaps-remove all base packaging, including the cardboard, styrofoam
base and styrofoam tub support (inserted in center of base).
Note: If you are installing a pedestal, proceed to the installation instructions that
come with the pedestal.
4.
Carefully return the washer to an upright position and remove the carton.
5.
Carefully move the washer to within 122 cm of the final location.
6.
Remove the following from the back side of the washer:
• 4 bolts
• 4 plastic spacers (including rubber grommets)
• 4 power cord retainers
(101.09 cm)
47
EN
SIDE
(86.9cm)
(101.09 cm)
Publicidad
