VALBERG WF 1810 D W566C Instrucciones De Uso página 65

C
Cleaning and maintenance
Cleaning the Door Gasket
1. Open the washer door. Using both hands, press down the door
gasket. Remove any foreign objects if found trapped inside the
gasket. Make sure there is nothing blocking the holes behind
the gasket.
2. While holding down the door gasket, inspect the interior gasket
by pulling it down with your fingers. Remove any foreign objects
if found trapped inside this gasket. Make sure there is nothing
blocking the holes behind the gasket.
3. When you are finished cleaning the door gasket, remove your
hands and the gasket will return to the operating position.
Moving, Storage and Long Vacations
Ask the service technician to remove water from drain pump
and hoses. Do not store the washer where it will be exposed to
the weather. When moving the washer, the tub should be kept
stationary by using the shipping bolts removed during installation.
See Installation Instructions in this book.
Be sure the water supply is shut off at the faucets. Drain all water
from the hoses if the weather will be below freezing.
65 EN