GE AET05 Manual Del Propietario E Instrucciones De Instalación página 10

Installation instructions
131WINDOW REQUIREMENTS
• These instructions are for a standard
double-hung window. You will need to
modify them for other types of windows.
• The air conditioner can be installed
without the accordion panels if needed
to fit in a narrow window. See the
window opening dimensions.
• All supporting parts must be secured
to firm wood, masonry or metal.
• The electrical outlet must be within
reach of the power cord.
• Follow the dimensions in the table and
illustration for your model.
Models A B C
AET05, AEW05 13 1/4" min. 22"-38" 18 1/4" min.
AEW06, AEW08 14 1/2" min. 23"-38" 19" min.
B===8
t
A
(With accordion panels)
C -_
(Without accordion panels)
[] STORM WINDOW REQUIREMENTS
A storm window frame will not allow the
air conditioner to tilt toward the outside,
and will keep it from draining properly.
To adjust for this, attach a piece of wood
to the stool.
WOOD PIECES-
WIDTH: 2"
LENGTH: Long enough to fit inside the
window frame.
THICKNESS: To determine the thickness,
place a piece of wood on the stool to
make it 1/2" higher than the top of the
storm window frame.
Attach securely with nails or screws
provided by the installer.
_r __j- Wood
1/2" higher _ m
than frame f__,,_Stool _==_! r
Storm /
r //
window / 7
//
frame
II //
[] PREPARE THE AIR CONDITIONER
_-1 Install the top mounting rail with 2 Type B
screws from the outside of the case.
Top mounting rail
Bottom mounting rail
[] Slide the left and right accordion panels
into the top and bottom mounting rails.
Top right
Top left
10