GE AET05 Manual Del Propietario E Instrucciones De Instalación página 4

About the controlson the air conditioner--models with touchpads.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
Thedisplay alwaysshowsthe room
temperatureexceptwhen settingthe
Set temperatureor the Delaytimer.
Light indicatesthe unit
is in the temperature or
delay time Set mode.
m Auto
am High m Fan Onl 9
bled am Energg Saver
m LOW m Cool
Light indicates the
delay timer is set.
Delay
Delay timer
Decrease J
0 Mode select -----_
O an speed
Decrease
Temperature --
set increase
and Decrease
Delay timer Increase
Auto Fan on/off
Fan speed Increase
Unit power on/off
Air ConditionerControls
Remote Control
Contro/s
O ower Pad
Turns air conditioner on _md off. _rhen
turned on, tile display will show tile room
temperature.
0 Display
Shows tile room temperature or time
remaining on the Delay fimeL Shows the Set
mmpemture while setting the mmpetature in
Coolor EnergySavermodes. The Set light will
mrn on while setting.
NOTE:The display will change to show file
room temperature after settings have been
made. To recall the Set mmpemture, press the
Tamp Increase• or Decrease• pads.
O emp Increase •/Decrease • Pads
Use to set temperature when in Coolor Energy
Savermode. The Setlight will turn on while
setting.
O elay fimerlncrease • (+)/Decrease • (-)
Pads
Each touch of the Increase•/Decrease •
pads on the unit or the Increase+/Decrease -
pads on the remote control will set the delay
time when using tlle Delay 1-24hrdiner (_).
The Setlight will mrn on while setting.
O an Speed Pads
Use to set tile fan speed to LOW, M ed,High
or Auto on the unit. NOTE:On the remote
conuol, use the fan speed Increase +/
Decrease - pads m set the fan speeds m LOW,
Med or High. Use the Auto pad m mrn Auto
fan oil.
O ode Pad
Use to set tlle air conditioner to Cool,Energy
Saveror FanOnlymode.
0
Delay Pads
Delay ON--When the air conditioner is ofL it
can be set to automatically come on in 1 to 24
hom_ at its previous mode and fan settings.
Delay OFF--When the air conditioner is on,
it can be set m automatically mrn off in 1 m
24 hems.
How toset:
Press file Delay 1-24hrpad on the unit or
file (_ pad on file remora conuol. Each touch
of the Increase •/Decrease • pads on the
unit or the Increase +/Decrease- pads on
the remora conuol will set the timer in
1-hour intervals. The Set light will mrn on
while setting.
To review die remaining time on die Delay
1-24hrtimei; press the Delay 1-24hr pad on the
unit or the _ pad on the remote control. Use
the Increase •/Decrease • pads on the unit
or the Increase +/Decrease-pads on the
remote control
to set a new time if desired.
To cancel the timer, press tt_e Delay 1-24hr pad
until tile light on the Delay 1-24hr pad goes off:
4