Daub DR Robot Manual De Usuario página 60

9.2. Error notifications
The following error messages may occur when the indicator light is flashing:
Fault message
Switch rear cover
Switch pressing ring
Switch volume bar
Motor protection is activated
1 or 2 start buttons faulty
(*) If the problem is not solved, contact your dealer or the Daub service department.
DR Robot | User manual
Cause
The back cover is loose during
operation.
The back cover switch is
malfunctioning.
The end switch of the press
ring is malfunctioning.
The pressing ring is not fitted.
The pressing ring is dirty and
does not contact the limit
switch in time.
The pressing ring returns
instead of rounding the dough.
The pressing ring returns
instead of rounding the dough.
The hydraulic motor and
rounding motor have stopped.
The start buttons aren't
touched simultaneously within
0,5 seconds.
60
Solution
Attach the rear cover.
Replace the switch for the
cover. (*)
Replace the limit switch for the
ring. (*)
Fit the pressing ring.
Clean the pressing ring. (*)
The end switch of the volume
bar is misfunctioning.
The end switch of the volume
bar is mispositioned to the
volume bar.
Reset the relay by pressing
the blue button of the
corresponding relay in the
control cabinet.
Press the two start buttons
simultaneously.
www.daub.nl