Aiwa NSX-A10 Manual De Instrucciones página 9

PROGRAMMED PLAY BASIC RECORDING
Up to 30 tracks can be programmed from any of the inserted
discs,
Use the remote control
1
2
3
2
3
5
I
c)>
....__
Press the PRGM button while pressing the SHIFT
button in stop mode.
PGM
is displayed.
Press one of the DISC DIRECT PLAY buttons to
select a disc.
The
selected disc is indicated in red on the display.
Go to the next step when the tray stops rotating.
Press the numeric buttons and the +1 O button to
program a track.
Example:
To select the 25th track, press the +1 O, +10 and 5 buttons.
To select the 10th track, press the +1 O and O buttons.
Total playing time of
Program number
the selected tracks
Selected track number
Total number of
selected tracks
4 Repeat steps 2 and 3 to program other tracks.
5 Press the M PRESET button to start play.
To check the program
Each time the < or * buttorf is pressed in stop mode, a
disc number, track number, and program number will be
displayed.
To clear the program
Press the CLEAR button in stop mode.
To add tracks to the program
Before playing, repeat steps 2 and 3. The track will be
programmed after the last track.
To change the programmed tracks
Clear the program and repeat all the steps again.
m
During the programmed play, the EDIT/CHECK, DISC
CHANGE. DISC DIRECT PLAY and numeric buttons do not
function.
RANDOM play is not performed during programmed play,
Preparation
Wind up the tape to the point recording starts.
Note that recording is done on only one side of the tape,
Use only normal (type I) tapes.
1
2
3
Insert the tape to be recorded on into deck 1 and
push the cassette holder to close it.
Get ready for the source to be recorded.
To record from a CD
Press the CD button and load a disc.
To record from a tape
Press the TAPE button. Then, insert the original tape into deck
2 and play it.
To record from a radio broadcast
Press the TUNER/BAND button and tune in to a station.
To record from the connected source
Press the VIDEO/AUX button and play it.
m
Press the @ button to start recording.
The > button is depressed simultaneously.
When recordina from a CD, playing and recording start
simultaneously from the first track.
To stop recording
Press the W= button on deck 1.
To pause recording
Press the 11 button on dqck 1.
To resume recording, press it again.
To record selected tracks of the CD
Before pressing the button, program the tracks,
To start recording precisely (except when recording from
a CD)
Before pressing the button at step 3, press the 11 button on
deck 1. Then, press the button. The deck enters recording
pause mode. When you wish to start recording, press the II
button again.
To record part of the CD
When the button is pressed, recording always starts from the
first track. To start in the middle of a track, play the CD first and
press the II button for
CD
at the point you wish to start recording
from. Then, press the button. The pause mode for CD button
is released automatically and recording starts.
m
Do not press the buttons on deck 2 during recording.
ENGLISH
8